AX Molding Co., Ltd.
Specialized manufacturer of T-dies and feed blocks
We can handle a variety of applications, including high-precision thin film dies, sheet dies, and multi-layered products.
Incidental Facilities of Extruder
all shorts
Liquid Addition Injection Device
pelletizer
Hot Cut type / Strand type
/ Water ring type
▶Strand type
There is the cut method of the pellet three kinds or more, and our company copes with every cutting method.
The Hot-cut method cuts the hot resin which went out of the dice at a moment and pelletizes it by an air-cooling without quenching it.
The Strand method cools the resin which appeared into a circle stick form with a water tank and cuts it with the pelletizer with the cutter finely.
The Water ring method cuts the hot resin which appeared from the dice like a Hot-cut method at a moment, but we drop a pellet in a drum and quench it by turning water in a drum and exhaust with water.
Pellet molding cutting device
T-die accessories
- T-die gate type stand
・Touch roll
・Air knife
・Vacuum chamber
・Air chamber
・Gear pump unit
・Screen changer
・Static mixer
・Polymer filter
・Water cooling device
・T-die decomposition device
・Spectral interferometer film thickness gauge
・Appearance inspection equipment
大容量GP+SC
Air chamber
Vacuum Chamber
Touch roll Air chamber Air knife Vacuum chamber
T-die disassembly device
.jpg)
TEMPERATURE
CONTROL
DEVICE
.jpg)
Fillm Thickness Meter
The measurement uses a spectrum interferometer of KEYENCE.
The gauge head is available for both the fixation and the movement. Logging always does data to a PC from PLC. The self-adjustment is possible on the heat bolt side, too.
film
thickness
meter
and more...
※enlarge it in a click
water tank of Blade hosing for vinyl chloride
+Accumulating apparatus
The accumulation device is one of the devices used for a fluid apparatus of oil pressure system and the air pressure system, and is a device saving a high pressure fluid to supply to work using the pressure of the fluid.